Features

Automatic Tyre Changer for 10” – 26” rims (inside locking 12” -26”, outside locking 10” – 24”) is equipped and completed with the highest technology to handle tyres  ranging from standards to high performance tyres.

Functions

• Automatic lubricator, tyre lever, inflating gun.
• Pneumatic tilting back vertical position
• Pneumaticly operated system locking the mount/demount tool 3mm away from the rim edge.
• 2-speed function (optional)
• High quality electric cabling.
• All parts have one- year warranty
• Spare Parts support for 10 years.
• CE certified.

RSM2400-S / RSM2600-S / RSM2800-S  are all equipped with 5  ton power  capacity  of Hydraulic Pump, Molded flange, Small Lathe and necessary accessories/equipment to  straighten  defected  rims  made  up of  alloy, chrome, mag  and sheet iron wheels from  10" to 28".  

-  Reliable Hydraulic system. 

-  High quality electric box and cabling. 

-  All parts have a 1-year warranty. 

-  Spare Parts support for 10 years.

-  CE certified 

RPM3200 is used to grind, clean and polish all kinds of car wheels as well as  truck wheels with special adapter. RPM3200 with the capacity ranging from 10” to 32”  isequipped with AC Motor Drive (speed controller),  a powerful polishing equipment with  two spinners.

-  CE certified  

-  All parts have one-year warranty. 

-  High quality electric cabling. 

-  Safer and User friendly usage for operators. 

-  Spare Parts support for 10 years.

FREQUENTLY ASKED QUESTIONS

About

STRAIGHTENING THE RIMS

-How does this Rim Straightening Machine straighten the defected rims ?

-ZETAMAK Rim Straightening Machines use technology with hydraulics pulls, pushes and heat. This technology has been the most recommended means of straightening since the turn of the last century. We don’t recommend cold roller wheels or use independent hydraulic jacks for higher accuracy of rim straightening. People using cold rollers claim it’s superior because heat is not used. The use of heat is not a problem unless it is used so much heat that it will change the metallic composition of the rim. Whereas, one never can control the impact of cold force on the metal.

-What type of wheels can be straightened by ZETAMAK Alloy Wheel Straightening Machines ?

-ZETAMAK Alloy Wheel Rim Straightening Machines can straighten not only your ordinary steel and aluminium wheels but also your valuable alloy and chrome wheels as well. Also, a competent rim straightener can do multi-piece wheels as well as magnesium rim straightening.

-How accurate are the repairs done by ZETAMAK Rim Repair Machines ?

-The accuracy is reaching about 98% . The tolerance is +/- 2 % maximum.

-How much is it depending on the individual wheel material ?

-It is very important the material of the rim. If it is classic steel rim there will be no problem to straighten because it is somewhat flexible . If you work on  alloy rims there should be given to much more attention. The defected parts / surface of alloy rim should be warmed before applying any pressure onto the defected parts/ surface.

-How common is it that a rim cracks during repair  ?

-It is not common for the steel rims. For alloys it is always in the possibility when you are not careful enough. If you have a crack you have to weld it first then straightening procedures are applied. Finally the welding residues should be cleared off with lathe system of the machine.

-Can your machine(s) repair "center bends", meaning wheels that have a side impact and wobble? 

-It depends. We must have a clean and smooth centerpiece to attach the defected rims onto the flange so it should be enough level surface on the center of the rim.

-Which bends can you not repair ?

-Almost every kinds of bends can be repaired but we do not recommend to correct the bends and cracks very close to the center of defected rims. 

-Is your manufacturing of all your products in Turkey, or do you just assemble in Turkey out of imported parts? 

-We manufacture of all the components in Turkey. Even the electric motors are of Turkish origin.

-How many of the parts in your machines %-wise are made in Turkey/ Europe? 

-100%

-How much % from China or other Asian countries?

-None

-Are you doing Research & Development and upgrade-development for your products in Izmir, Turkey ?

-Since 1990 in which we began manufacturing these machines , Research & Development have been an ongoing process. We have always searched and looked for having better physical appearance , style and upgraded functions of the machines.

Features

LEON2800-S  Universal Truck Tyre changer suitable for truck and bus fleets with 14" - 30" rim (max. tyre diameter 1725 mm./68"; max. tyre width 710 mm./28"). Equipped with manual wheel clamping system by faceplate, cones and ring nut; also equipped with traditional double tool for mounting/removing tubeless and/or tube tyres.

 
Functions

• Hydraulic movement of clamping chuck holding arm (up-down);
• Hydraulic travel movement of operating arm carriage (left-right);
• Operating arm manual tilting;
• Wheel clamping by face plate, cones and ring nut;
• Operating arm and clamping chuck arm facing each other;
• All motions controlled by joysticks;
• Safety switches and electric circuit breakers for both pump motor and chuck motor.
• High quality electric cabling.
• All parts have one- year warranty
• Spare Parts support for 10 years.
• CE certified.

RSS1430 are with the quality of double functions; Rim Straightening and Polishing. Ideal for small shops where they have no sufficient places for two different equipment. RSS models are  equipped with 5  ton power  capacity  of Hydraulic Pump, Molded flange, Small Lathe,  AC Motor Drive (speed control system) and Polishing equipment and necessary accessories/equipment to  straighten  defected  rims  made  up of  alloy, chrome, mag  and sheet iron wheels from  14" to 30".  

-  CE certified  

-  All parts have one-year warranty. 

-  High quality electric box and cabling. 

-  Reliable Hydraulic system. 

-  Spare Parts support for 10 years.

Features

• Easy installation

• Four cylinder design, more smoothly

• Extendable platform design, wide range of services

• Mechanical locking device safe and reliable

• Pneumatic unlocked and low noise

• Design of High Strength structure to ensure security

Features:

ANATOLIO TTC26-II represents a new generation of tyre changing machines designed to provide all the best solutions for the mounting and demounting of all tyre types available on the market. This model is on the cutting edge in the resolution of problems and setting quality standards.

TTC26-II is equipped with self-centring function, two-speed motor, clamping system with stepping function, tilting column and pneumatic locking system, angle of mounts/demounts tool prevents the rim from damage and plastic protector special for mounts/demounts tool.

* * *  AL-320C  Robotic Assist Arm is optional.

-  CE certified  

-  All parts have one-year warranty. 

-  Spare Parts support for 10 years.

-  High quality electric layout and cabling. 

-  Reinforced rigid body. 

RSM1430-S is the largest family member of RSM models and it is equipped with 5  ton power  capacity  of Hydraulic Pump, Molded flange, Small Lathe, SUS, AC Motor Drive (speed control system) and necessary accessories/equipment to  straighten  defected  rims  made  up of  alloy, chrome, mag  and sheet iron wheels from  14" to 30".  

-  High quality electric box and cabling. 

-  Reliable Hydraulic system. 

-  All parts have one-year warranty. 

-  Spare Parts support for 10 years.

-  CE certified